How to Draw a Realistic Dragon Head TUTORIAL

Download Article

Download Article

Drawing a dragon is a smashing way to evidence your creativity, but it may be challenging to draw the head because it has a lot of item. Luckily, yous can commencement sketching the head with basic shapes before adding in the features. Fantasy dragons ordinarily have pointier snouts and are the about common types in Western culture, while Chinese dragons accept boxier heads. With a scrap of practice, you lot'll be able to depict whatever type of dragon head y'all want!

  1. 1

    Draw a circle in the middle of your paper. Use a pencil and sketch your lines in lightly and so you're able to erase them easily. Make the circle in the center of the folio, leaving room on each side of information technology so you take space to add more than features. The circle doesn't need to be perfectly circular, but y'all may use a compass to aid you draw your lines if you want.[1]

    • The cartoon of the dragon caput volition be in contour view when you're finished.
    • If y'all program on calculation the balance of the dragon's torso to your drawing, so make certain the circle is pocket-size enough so yous can fit the body on your sheet of paper.
    • If you want your dragon to have a longer face, and then brand a horizontal oval instead of a circumvolve.

  2. two

    Add together a rounded trapezoid on the side of your circle for the dragon's snout. Choose either the left or correct side of the circle depending on which way you desire the dragon head to face up. Draw the meridian horizontal line of the snout coming from the elevation of the circle so it's the same length equally the circle'due south diameter. Make another horizontal line coming from the lesser of the circle to make the lesser of the snout. Connect the 2 lines so the corners are rounded.[2]

    • You can make the snout longer or shorter depending on how you desire the dragon to expect.
    • Don't leave sharp corners on the end of the snout or else your dragon won't look natural.

    Advertizing

  3. 3

    Brand parallel lines coming out the lesser of the circle for the dragon's neck. Start one of the lines where the bottom of the snout connects to the head. Make a curved line coming down from the head as long equally you desire information technology. Then draw some other curved line that'south parallel to the first i on the opposite side of the head.[3]

    • The dragon's neck unremarkably gets wider closer to its body, so yous can make the lines get further apart near the bottom if you desire to.

    Tip: Add a neck even if you don't plan on drawing the rest of the dragon's body. That way, the caput will still take the illusion that information technology'southward connected to something.

  4. 4

    Sketch a curved horizontal line through the trapezoid to make a mouth. Start drawing the rima oris in the middle of the trapezoid's narrow finish. Extend the line horizontally then information technology ends nearly the middle of the dragon'south head. Bend the finish of the mouth upwards if you want your dragon to wait similar it's smiling, or angle information technology down if you desire information technology to pout.[four]

    • Put a parallel line underneath the mouth if yous want it to look like your dragon has a bottom lip.

  5. 5

    Depict triangles coming out from the oral cavity to give your dragon teeth. You tin either add together teeth that point up or downwards along your dragon's mouth. Choose anywhere along the oral cavity and depict a triangle that points upward or downward starting from the mouth line. Add five-6 separate teeth in your dragon's oral fissure so information technology looks more fearsome.[5]

    • Don't line the unabridged mouth with teeth or else your drawing may start to look messy.
    • You lot tin accept teeth pointing both up and downwards.

  6. half dozen

    Put a circle or triangle above the rima oris to make an eye. Place the eye next to where the top of the snout connects to the side of the circle. If you want your dragon to expect more realistic, describe a small-scale circumvolve for the eye so at that place's a small gap between information technology and the height of the snout. For a dragon that looks angrier, add a horizontal triangle and then the bespeak faces the snout.[half-dozen]

    • Don't make the centre too large or else you won't have room to add other features.
    • Search for pictures of other reptiles to encounter what their optics wait like so you lot tin utilize them as a reference.

  7. 7

    Add bumps and ridges on the top of the dragon'due south head for more than texture. Dragons don't have shine pare, so their heads volition look bumpy and knobby from their scales. Use the outlines you currently accept as guides and go over them to add curves to the snout. Apply wavy or zig-zag lines going from the stop of the snout toward the back of its caput.[seven]

    • For instance, you lot may add a big crash-land above the dragon's eye if you want to give it a prominent forehead.
    • You lot tin can add as many or as few bumps and ridges to the dragon depending on how you want it to expect.

  8. eight

    Give your dragon horns if you want to. If you want to add together horns to your dragon, make a vertical line extending out from the top of the dragon'southward head. Extend the line out so information technology's about the aforementioned length as the snout. Add another line that starts on the dorsum side of the dragon'south head and connects to the end of the first line to complete the horn.[eight]

    • Make the horn shorter if you want to make it seem like your dragon is younger.
    • You tin can make the horns any shape you desire. Expect up horns on real animals to get influences for what you tin can include on your dragon.
    • You may likewise choose to add horns or spikes running downwardly the back of the dragon'due south neck if you want to.

  9. 9

    Erase the lines you used as guides. Go over your drawing with an eraser and become rid of whatever lines that aren't still a function of your dragon. For example, you may erase the circle or the original outline of the snout if you added more bumps to it. Continue erasing any guides or mistakes you lot made, and accident off the shavings when you're finished.[9]

    • Darker lines will be harder to erase than lightly sketched lines.
    • Get a clickable item eraser if you need to erase lines in minor areas. You can get special erasers from an fine art store or online.

  10. ten

    Add details like scales and nostrils to brand your dragon seem realistic. Once you erase the guide lines, beginning adding the final details into your drawing. Beginning with modest ovals or circles for the nostrils at the end of the snout. Once you add the nostrils, draw in U-shaped lines on the sides of the dragon's head and down its cervix requite the illusion of scales.[10]

    • You don't need to draw every scale on the dragon's face since it could make your cartoon await messy or unclear.
    • Shade your drawing with a pencil or colored pencil if yous want to add more perspective or color.

  11. 11

    Finished.

    Advertizing

  1. ane

    Make a circle with a rounded rectangle for the dragon'south head and snout. Start by making a circle in the middle of your piece of newspaper so you have room to add features on each side. Choose the right or left side of the circle to put the snout depending on what management you want the dragon to face. Start the rectangle halfway downward from the superlative of the circle and connect the bottom edge to the lowest point of the circle.[xi]

    • You can choose to make the dragon's snout thicker if you lot want.
    • When you're finished, your dragon head will be in contour view.
    • Sketch your lines lightly at beginning and so you can easily erase them afterward on. Otherwise, yous'll leave marks on the paper that you can't get rid of.

  2. 2

    Sketch in the dragon's cervix coming out from the other side of the head. Start a line at the point where the bottom of the snout touches the circle. Curve the line slightly downwardly and so it looks like it extends off of the page. Describe the top of the cervix coming from the peak side of the circle so it's parallel with the showtime line you lot drew.[12]

    • While you don't have to depict the neck for your dragon, it adds to the illusion that the head is connected to a torso.
    • Chinese dragons have long, snake-similar bodies, then the neck will stay the same thickness the entire time.

  3. 3

    Draw a horizontal line and triangles to give your dragon a oral fissure and teeth. Start the line for the mouth then information technology's a 3rd of the way upwardly from the lesser of the rectangle. Brand a slightly curved horizontal line that ends nigh the middle of the dragon'due south caput. Draw small triangles coming out from the meridian or bottom of the line to requite the dragon abrupt teeth.[13]

    • Requite your dragon a smile if yous want it to wait happy or a frown if you want information technology to appear more fierce.
    • Only add a few teeth to the mouth then the cartoon doesn't look messy.

  4. 4

    Add together a circle or oval above the mouth for your dragon's eye. Identify the eye for your dragon inside the circumvolve so it's adjacent to where the height of the snout connects to the head. Make a circle or a horizontal oval for the eye and then there'due south a small-scale gap between it and the elevation of the head. Add an angled line above the center to give your dragon an aroused brow.[14]

    • The dragon's pupil tin be round similar a homo, or you lot can make it await similar a slit, like to a ophidian or true cat.
    • Don't make the eye too big or else the dragon will look unnatural and you won't take room to place the rest of the features.

  5. 5

    Depict antlers or horns on top of your dragon's head. Chinese dragons usually take antlers that wait similar a deer, but they can also have standard spiked horns. If you want to add antlers, Draw a Y-shape coming out from the back of the dragon'southward head. Add lines on either side of the Y-shape then the antler ends in curved points. If yous want to make horns, draw a long triangle coming out from the back of the dragon'south head instead.[15]

    • You don't need to add antlers or horns at all if you don't want to.

  6. half-dozen

    Sketch in ears underneath the antlers. Unlike many other dragons, Chinese dragons have ears on the sides of their caput that look like to cow or deer ears. Draw a curved line coming out from the side of the dragon'southward head and extend information technology so it's about half as long every bit the caput'south diameter. Add together some other curved line underneath the commencement one and connect the ends to make the ear.[16]

    • You don't demand to draw the ear on the other side of the head since y'all wouldn't exist able to see it from this perspective.

  7. 7

    Give your dragon a beard and mane. Chinese dragons accept hair and manes around their heads that resemble a king of beasts. Put in wavy lines that end in points around the bottom of the snout and the back of the caput. Draw the hair in tufts rather than adding the individual strands then your drawing doesn't go muddled.[17]

    • The mane volition go behind your dragon'south horns or antlers if it has them.
    • You can brand the pilus as long or brusque as you desire.

  8. 8

    Erase the guide lines that aren't a function of your dragon'southward head. Use the eraser on your pencil or a block eraser to make clean up the lines on your drawing. Erase any of the lines that you were using equally guides, such as the sides of the circle or parts that are overlapped by hair. Continue getting rid of lines you don't need in your drawing anymore and accident the shavings off when y'all're done.[eighteen]

    Alert: Don't wipe the cartoon with your manus when y'all're done erasing your lines since you lot could easily smudge the pencil.

  9. nine

    Add nostrils and whiskers to the snout. Put in pocket-sized circles or ovals near the front of the snout for your dragon'southward nostrils. Leave a small-scale gap abreast the nostril before drawing a long wavy line that ends near the back of the dragon'south head. Make another parallel wavy line directly underneath the commencement one and connect the ends to add together the whisker.[xix]

    • Draw small fume clouds coming out from the dragon's nostrils if you want to make it seem similar information technology's about to jiff fire.
    • Shade your cartoon with your pencil to brand information technology look more realistic and add perspective.
    • Use colored pencils if y'all want your dragon to look more colorful.

  10. 10

    Finished.

    Advertizement

Add New Question

  • Question

    Why would I try shading the drawing rather than redoing the color?

    Community Answer

    Shading makes the art look more real. Redoing the color makes it look more like a cartoon.

  • Question

    What if this is hard for me?

    Jacquelyn Helmuth

    Jacquelyn Helmuth

    Customs Answer

    Try sketching it lightly and use the picture of the dragon you want to depict. Then, lightly describe what you run into and, if you happen to get the shape you want, draw a petty darker. With practise, you lot will improve.

  • Question

    How do yous make ballsy scenes with dragons that POP out at you?

    Community Answer

    Apply dramatic shading. For instance, if your dragon is facing slightly left, add together shading under its mentum, along its neck, at the left end of its optics, and at the base of operations of its horns.

  • Question

    How practise I depict a dragon's eye?

    Community Answer

    Draw a more than rounded outline than that of a homo, more like a cat's eye. Give the eye a thin, curved pupil. Add shading to propose a colored iris and surround the eye with scales.

  • Question

    What would exist a good background for a dragon?

    Tokayyoshi

    Tokayyoshi

    Community Answer

    If it's a burn-animate dragon, add flames! If your dragon lives in the ocean, draw fish, coral, and bubbles.

  • Question

    How tin can I brand a drawn dragon announced lifelike?

    Community Answer

    Add lots of shading, i.e., depict where the lighting would prove.

  • Question

    I could not describe these without running into a problem. Is there an easier way?

    Community Answer

    Information technology depends on your level of ability. If you want simpler processes, you can start with easier dragons and build up from there.

  • Question

    How would I depict a frill?

    Community Answer

    Frills wait similar smaller versions of wings that are attached to the head. Just look at fly references and size them downwardly. If you need a ameliorate visual, tissues and pipe cleaners will help you get the positioning right.

  • Question

    Is there a simpler way to draw the dragon'south horns?

    Community Answer

    You can make two wavy lines that connect at the summit and form a point, and if that doesn't work, you can make a stretched triangle with some overlapping skin at the base.

  • Question

    How do I draw a cave for my dragon?

    Community Answer

    Yous can describe a cave by drawing a rocky circle and adding shading in the background, darkening as you go deeper. Endeavour to make the cave walls uneven, and if y'all want, add some hanging rocks, rocks hugging the cave wall, etc. Greyness or brown would be good default colors, only you can add multiple colors if you lot want to include glowing jewels and gems.

Run into more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertizing

Video

  • Use pictures of other animals for reference if you lot want to make your dragon more unique or add together unique features. For example, y'all tin can requite your dragon a beak like a turtle or a

Thanks for submitting a tip for review!

Advertizing

Things You'll Need

  • Paper
  • Pencils
  • Eraser
  • Colored pencils (optional)

About This Commodity

Article Summary X

To draw a dragon head using shapes, get-go by drawing 2 circles shut together to make the optics. So, draw ii wedge-like shapes for the snout, and sketch the neck using long, curvy lines, like to the image of a snake. Next, use triangles and trapezoids to shape the dorsum of the head, and draw cones and mounds to represent parts like the horns or locks of pilus. Afterwards, refine the lines and add together details such as fins and spikes. Finally, erase whatever unnecessary lines and color your dragon as desired. To learn more, including how to describe a dragon head using creature references like goats and crocodiles, read on.

Did this summary assistance you?

Cheers to all authors for creating a page that has been read 554,797 times.

Did this article help you?

DOWNLOAD HERE

How to Draw a Realistic Dragon Head TUTORIAL

Posted by: anthonywrive1946.blogspot.com

Comments

Post a Comment